Upgrade 2X-34 Specs:
Note: Upgrade 4=2X-34 increases the size and capacity of X-Winder model 2X-23 to 16in. (400mm) maximum mandrel diameter.
You need Model 2X-23 before you can buy upgrade 2X-34.
- Max. Mandrel Diameter: up to 16" (406mm) in diameter (Add Dual Mandrel Motor)
- Frame and Carriage: standard 1" aluminum extrusions (Add Dual Carriage Motor)
- Length: up to 20 feet (3m) - Long Bars NOT Included (see Long Bars)
- Mandrel width: up to 8" (200mm) in width
- Mandrel Maximum RPM: 90
- Carriage Maximum Speed: 15 in/s (380mm/s)
- Electrical Power: 110v/220v AC with 24V/5A DC to the stepper motors
- Mandrel & Carriage Motors: geared NEMA 34 stepper motors with 4,000 oz-in (288 kg cm) holding torque
- Drive Belts: "L" type 1/2" (12.5mm) wide for carriage and mandrel
- Filament Tension: adjustable strap friction mechanism
- Reel Holder: single reel standard or dual reel option (see dual reel)
- Resin Bath: 6 fluid ounce resin bath (170 cc^3)
- Carriage Wheels: custom dual bearings with 8mm axle
- Electronics: switch controller box and 2 axis controller boxes with USB cables (not sold separately)
- Software: X-Winder Designer program and Executor program packages standard (not sold separately)
Note: X-Winder ships with "L" size belt of 18 feet (5.6m) long - enough for about an 8 foot long (2.5m) X-Winder. For additional length, you'll need a longer L-Belt.
*** due to the max weight settings for shipments leaving the USA please place separate orders for Winders and Upgrade kits.